DATASHEET BKP6-AX2AX2-2450
BKP6-AX2AX2-2450
Wi-Fi 6
- SWaP-C (Size, Weight, Power & Cost) optimized Radio Module
- High-Performance, Dual independent Radio operating in ISM 2.4 GHz license-free Band (2×2 MIMO) and Sub GHz 902-928 MHz Band (1×1 SISO)
- Conforming to IEEE 802.11 b/g/n Standards
- 29 dBm TX Power
- -40 deg C to +85 deg C Operating Temperature
- Robust and mil grade Vibration Resilience
IEEE 802.11 a/b/g/n/ac/ax
Wifi 6 Transceiver module, complying to 802.11 an/ac/ax standards supporting 2T2R in 4.9 GHz and 5 GHz Bands.
OpenWRT support
OpenWRT Linux supported by ath11K wireless driver
Interference Desensitization
Low noise Receiver design integrated with top-tier OBB management provides strong resilience to out-of-band signals, maintaining robust connectivity in the most challenging environments
Best-in Class Receive Sensitivity
Low noise receiver tweaked for optimized Noise Figure offers sharp ears to the OEM systems to maintain reliable connectivity under all circumstances
TX Power of 30 dBm
Highly linear transmitter design with an ultra-high TX power of 30 dBm adhering to strict EVM level exceeding requirements of OFDM modulated signals
Low Latency and High Data Bandwidth
The module offers low latency and high Data Bandwidth, which are crucial for seamless communication and optimal performance. With theoretical maximum speeds of up to 1.2 Gbps with 1024 QAM modulation, it delivers exceptional performance for critical applications
BlackPepper BKP-N2N2-2450
- SWaP-C (Size, Weight, Power & Cost) optimized Radio Module
- High-Performance, Dual independent Radio operating in ISM 2.4 GHz license-free Band and 4.9 GHz (Public safety), UNII-B1,B2A,B2C and B3 Bands
- Conforming to IEEE 802.11 a/b/g/n Standards and 2×2 MIMO
- 29 dBm TX Power
- -40 deg C to +85 deg C Operating Temperature
- Robust and Vibration Resillience
| Radio chipset |
Qualcomm IPQ 6028 – Quad Arm Cortex A53 at 1.8 GHz (CPU) QCA 8081 (Ethernet PHY) |
| NOR Flash NAND Flash RAM |
SPI NOR Flash, 32MB NAND Flash, 256 MB DDR3L, 1 GB |
| Operating System | Linux, OPENWRT, supports open source ath11K Linux driver |
| Security |
AES 128, 256, SHA 1-96, 128, 256, 512, CCM and GCM operation FIPS level 2 certification |
|
Operating frequency – 11 b/g/n/ac/ax Operating frequency – 11 a/n/ac/ax |
2400 MHz to 2483.5 MHz (2S, MU- MIMO) 4900 MHz to 5850 MHz (2S, MU-MIMO) |
|
Data rate -11b Data rate -11g Data rate -11n Data rate -11ac Data rate -11ax |
1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps 6Mbps, 9Mbps, 12Mbps, 18 Mbps, 24Mbps, 36Mbps, 48Mbps, 54Mbps MCS0, MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7 MCS0, MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7 ,MCS8, MCS9, MCS10, MCS11 MCS0, MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7 ,MCS8, MCS9, MCS10, MCS11 |
| Channel BW – 2.4 GHz, 4.9 GHz Channel BW – 5 GHz |
5 MHz/10 MHz/20 MHz /40 MHz 5 MHz/10 MHz/20 MHz / 40 MHz / 80 MHz |
| Compliance | RoHS, MIL-STD-810H Shock & Vibration |
| MAC ID | 74E277 Series |
| INTERFACE SPECIFICATIONS | |
| Power , Operating Voltage |
DC in, 9V to 30V |
| Total DC Power Consumption | 21W (Excluding USB Add-on) |
| RF Antenna connector | x4 SMA Female (Jack) connectors |
| ENVIRONMENTAL SPECIFICATIONS | |
| Operating Temperature Range | -40 deg C to +85 deg C |
| PHYSICAL SPECIFICATIONS | |
| Mechanical Dimension | (L) 90 mm x (W) 50 mm x (D) 11.4 mm (excluding SMA connectors) |
| Weight | 100 g |
| REGULATORY INFORMATION | |
| Compliance | In Progress |
| PACKAGING INFORMATION | |
| No of units | TBD |
| ORDERING INFORMATION | |
| BKP6-AX2AX2-2450 |
BlackPepper 6, Dual Independent, 2X2 MU-MIMO IEEE 802.11 a/b/g/n/ac/ax, 2.4 GHz, 5 GHz Bands, 30 dBm |
| Frequency (MHz) | Data rate | TX Power per chain (dBm) | Current 24V (A) | RX Sensitivity (dBm) |
| 2412 TO 2462 |
1 Mbps | 27 | 11.5 | -100 |
| 6 Mbps | 27 | 11.5 | -96 | |
| MCS0-HT20 | 27 | 11.5 | -93 | |
| MCS0-HT40 | 27 | 11.5 | -90 | |
| MCS0-VHT20 | 27 | 11.5 | -96 | |
| MCS0-VHT40 | 27 | 11.5 | -93 | |
| MCS0-HE20 | 27 | 11.5 | -94 | |
| MCS0-HE40 | 27 | 11.5 | -91 | |
4920 TO 5500 |
6 Mbps | 27 | 11.5 | -94 |
| MCS0-HT20 | 27 | 11.5 | -92 | |
| MCS0-HT40 | 27 | 11.5 | -89 | |
| MCS0-VHT20 | 27 | 11.5 | -95 | |
| MCS0-VHT40 | 27 | 11.5 | -92 | |
| MCS0-VHT80 | 27 | 11.5 | -89 | |
| MCS0-HE20 | 27 | 11.5 | -93 | |
| MCS0-HE40 | 27 | 11.5 | -90 | |
| MCS0-HE80 | 27 | 11.5 | -87 | |
| 5500 TO 5700 |
6 Mbps | 27 | 11.5 | -94 |
| MCS0-HT20 | 27 | 11.5 | -92 | |
| MCS0-HT40 | 27 | 11.5 | -89 | |
| MCS0-VHT20 | 27 | 11.5 | -95 | |
| MCS0-VHT40 | 27 | 11.5 | -92 | |
| MCS0-VHT80 | 27 | 11.5 | -89 | |
| MCS0-HE20 | 27 | 11.5 | -93 | |
| MCS0-HE40 | 27 | 11.5 | -90 | |
| MCS0-HE80 | 27 | 11.5 | -87 | |
| 5700 TO 5860 |
6 Mbps | 27 | 11.5 | -94 |
| MCS0-HT20 | 27 | 11.5 | -92 | |
| MCS0-HT40 | 27 | 11.5 | -89 | |
| MCS0-VHT20 | 27 | 11.5 | -95 | |
| MCS0-VHT40 | 27 | 11.5 | -92 | |
| MCS0-VHT80 | 27 | 11.5 | -89 | |
| MCS0-HE20 | 27 | 11.5 | -93 | |
| MCS0-HE40 | 27 | 11.5 | -90 | |
| MCS0-HE80 | 27 | 11.5 | -87 |
| REF | PART |
| 1,2 | SMA Connector, 4.9/5 GHz (Ant1,Ant2) |
| 3,4 | SMA Connector, 2.4 GHz (Ant1,Ant2) |
| 5 | Power Connector, JST SM04B-GHS-TB |
| 6 | Ethernet Connector, HIROSE IX60G-A-10P |
| 7 | USB Type-A Connector for USB 2.0 |
| 8 | RGB LED |
| 9 | USB Micro-B Connector for UART |
| 10 | JST SM08B-GHS-TB for EJTAG (On bottom side) |
| 11 | USB, Type-C Connector for USB 3.0 |
| 12 | SD Card Connector |
