DATASHEET ES-P-N2N2-5050

ES-P-N2N2-5050

Wi-Fi 4

  • Wireless Network system packaged in PCB assembly for easy OEM integration
  • High-Performance, Dual independent Radio operating in 4.9 GHz Public safety, UNII-B1,B2A,B2C and B3 Bands (2×2 MIMO)
  • Conforming to IEEE 802.11 a/b/g/n Standards
  • 29 dBm TX Power
  • -40 deg C to +85 deg C Operating Temperature
  • Robust and mil grade Vibration Resilience
ES-P-N2N2-5050

Frequency Diversity

Simultaneous operation of 4.9 GHz (public safety), UNII-B1,B2A,B2C,B3Bands, Software configurable

OpenWRT support

OpenWRT Linux supported by ath9K wireless driver

Interference Desensitization

Low noise Receiver design integrated with top-tier OBB management provides strong resilience to out-of-band signals, maintaining robust connectivity in the most challenging environments

IEEE 802.11 a/n

Wifi 4 Transceiver module, complying to 802.11 an standards supporting 2T2R MIMO (5 GHz) and 2T2R MIMO (5 GHz)

TX Power of 29 dBm

Highly linear transmitter design with an ultra-high TX power of 29 dBm adhering to strict EVM level exceeding requirements OFDM modulated signals

Low Latency and High Data Bandwidth

Simultaneous operation across multiple frequency Bands not only offer frequency diversity but also offer high data bandwidth and low latency. With theoretical maximum speeds of up to 600 Mbps, it delivers exceptional performance for critical applications

BKP-N2N2-2450

BlackPepper BKP-N2N2-2450

BlackPepper BKP-N2N2-2450

  • SWaP-C (Size, Weight, Power & Cost) optimized Radio Module
  • High-Performance, Dual independent Radio operating in ISM 2.4 GHz license-free Band and 4.9 GHz (Public safety), UNII-B1,B2A,B2C and B3 Bands
  • Conforming to IEEE 802.11 a/b/g/n Standards and 2×2 MIMO
  • 29 dBm TX Power
  • -40 deg C to +85 deg C Operating Temperature
  • Robust and Vibration Resillience

On-board Radio (11a/n) chipset

MiniPCie Radio (11a/n) chipset

QCA 9550-AT4B (CPU) & AR 8033-AL1B (Ethernet PHY)

AR 9592-AR1B

NOR Flash

NAND Flash

RAM

SPI Flash, 16MB

NAND Flash, 256 MB

DDR2, 200 MHz, 256 MB (64Mx16x2)

Operating frequency – on-board Radio

Operating frequency – MiniPCIe Radio

4920 MHz to 5825 MHz (Operating Channels)

4920 MHz to 5825 MHz (Operating Channels)

Data rate-11n HT20/HT40-1S (SISO)

Data rate-11n HT20/HT40-2S (MIMO)

6Mbps, 9Mbps, 12Mbps, 24Mbps, 36Mbps, 48Mbps,54Mbps (11a)

MCS0, MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7 (11n)

MCS8, MCS9, MCS10, MCS11, MCS12, MCS13, MCS14, MCS15 (11n)

Channel BW – On-board Radio (11a/n)

Channel BW – MiniPCie Radio (11a/n)

5 MHz/10 MHz/20 MHz /40 MHz

5 MHz/10 MHz/20 MHz /40 MHz

RoHS Compliance Compliant
INTERFACE SPECIFICATIONS
Power in
DC in through 2 pin header
Operating Voltage 9V to 30V, 16W max
RF Antenna connector x4 MMCX Female (Jack) connectors
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -40 deg C to +85 deg C
PHYSICAL SPECIFICATIONS
Mechanical Dimension (L) 111.5 mm x (W) 98.55 mm x (D) 17.06 mm
Weight 130g
REGULATORY INFORMATION
Compliance TBD
PACKAGING INFORMATION
No of units TBD
ORDERING INFORMATION
ES-P-N2N2-5050

OEM PCB Assembly Kit, ES-P-N2N2-5050, HW Rev 03.00

SBC, 5 GHz, MIMO, HW Rev 2001.0300

MiniPCIe, 5 GHz, MIMO, HW Rev 1805.0600

Frequency (MHz) Data rate TX Power per chain (dBm) Current 24V (A) RX Sensitivity (dBm)

4920 TO 4990

(onboard radio)

6 Mbps 24 0.37 -94
MCS0-HT20 26 0.40 -92
MCS0-HT40 26 0.40 -89

5180 TO 5320

(onboard radio)

6 Mbps 25 0.38 -94
MCS0-HT20 26 0.40 -92
MCS0-HT40 26 0.40 -89

5550 TO 5720

(onboard radio)

6 Mbps 25 0.38 -94
MCS0-HT20 26 0.40 -92
MCS0-HT40 26 0.40 -89

5745 TO 5825

(onboard radio)

6 Mbps 25 0.38 -94
MCS0-HT20 26 0.40 -92
MCS0-HT40 26 0.40 -89

4920 TO 4990

(miniPCIe radio)

6 Mbps 23 0.23 -94
MCS0-HT20 26 0.27 -92
MCS0-HT40 26 0.27 -89

5180 TO 5320

(miniPCIe radio)

6 Mbps 24 0.24 -94
MCS0-HT20 26 0.27 -92
MCS0-HT40 26 0.27 -89

5500 TO 5720

(miniPCIe radio)

6 Mbps 26 0.27 -94
MCS0-HT20 26 0.27 -92
MCS0-HT40 26 0.27 -89

5745 TO 5825

(miniPCIe radio)

6 Mbps 26 0.27 -91
MCS0-HT20 26 0.27 -89
MCS0-HT40 26 0.27 -86

 

adopter board

adopter board 1

Mechanical dimensions