DATASHEET ES-P-N2N1-2409
Wi-Fi 4
- Wireless Network system packaged in PCB assembly for easy OEM integration
- High-Performance, Dual independent Radio operating in ISM 2.4 GHz (2×2 MIMO) and Sub GHz 902 MHz to 928 MHz Band (1×1 SISO)
- Conforming to IEEE 802.11 b/g/n Standards
- 29 dBm TX Power
- -40 deg C to +85 deg C Operating Temperature
- Robust and mil grade Vibration Resilience
Frequency Diversity
Simultaneous operation of 2.4 GHz, Sub GHz 900 MHz ISM Bands, Software configurable
OpenWRT support
OpenWRT Linux supported by ath9K wireless driver
Interference Desensitization
Low noise Receiver design integrated with top-tier OBB management provides strong resilience to out-of-band signals, maintaining robust connectivity in the most challenging environments
IEEE 802.11 b/g/n
Wifi 4 Transceiver module, complying to 802.11 abgn standards supporting 2T2R MIMO (2.4 GHz) and 1T1R SISO (900 MHz)
TX Power of 29 dBm
Highly linear transmitter design with an ultra-high TX power of 29 dBm adhering to strict EVM level exceeding requirements OFDM modulated signals
Low Latency and High Data Bandwidth
Simultaneous operation across multiple frequency Bands not only offer frequency diversity but also offer high data bandwidth and low latency. With theoretical maximum speeds of up to 370 Mbps, it delivers exceptional performance for critical applications
BlackPepper BKP-N2N2-2450
BlackPepper BKP-N2N2-2450
- SWaP-C (Size, Weight, Power & Cost) optimized Radio Module
- High-Performance, Dual independent Radio operating in ISM 2.4 GHz license-free Band and 4.9 GHz (Public safety), UNII-B1,B2A,B2C and B3 Bands
- Conforming to IEEE 802.11 a/b/g/n Standards and 2×2 MIMO
- 29 dBm TX Power
- -40 deg C to +85 deg C Operating Temperature
- Robust and Vibration Resillience
| Radio chipset | Qualcomm QCA 9550-AT4B (CPU) & AR 8033-AL1B (Ethernet PHY) Qualcomm AR 9592-AR1B |
| NOR Flash NAND Flash RAM |
SPI Flash, 16MB NAND Flash, 256 MB DDR2, 200 MHz, 256 MB (64Mx16x2) |
| Operating System | Linux, OPENWRT, supports open source ath9K Linux driver |
| Security |
128-bit AES, WEP, TKIP and WAPI hardware encryption Support for IEEE 802.11d, e, h, i standards Small packet size (96 Bytes) in AES encryption at full packet rate Loopback mode to assist FIPS AES certification |
|
Operating frequency – 11 b/g/n Operating frequency – 11 b/g/n |
2400 MHz to 2483.5 MHz (2S, MIMO) 902 MHz to 928 MHz (1S, MIMO) |
|
Data rate – 1S, SISO
Data rate – 2S, MIMO |
1 Mbps, 2 Mbps, 5.5Mbps, 111 Mbps (11b) 6Mbps, 9Mbps, 12Mbps, 24Mbps, 36Mbps, 48Mbps,54Mbps (11g) MCS0, MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7 (11n, 1S,SISO) MCS8, MCS9, MCS10, MCS11, MCS12, MCS13, MCS14, MCS15 (11n,2S,MIMO) |
|
Channel BW – 2.4 GHz Channel BW – 900 MHz |
5 MHz/10 MHz/20 MHz /40 MHz 5 MHz/10 MHz/20 MHz |
| Compliance | RoHS, MIL-STD-810G Shock & Vibration |
| MAC ID | 74E277 Series |
| INTERFACE SPECIFICATIONS | |
| Power |
DC in |
| Operating Voltage | 9V to 30V, 12W max |
| RF Antenna connector | x3 MMCX Female (Jack) connectors |
| ENVIRONMENTAL SPECIFICATIONS | |
| Operating Temperature Range | -40 deg C to +85 deg C |
| PHYSICAL SPECIFICATIONS | |
| Mechanical Dimension | (L) 111.5 mm x (W) 84.6 mm |
| Weight | TBD |
| REGULATORY INFORMATION | |
| Compliance | In Progress |
| PACKAGING INFORMATION | |
| No of units | TBD |
| ORDERING INFORMATION | |
| ES-P-N2N1-2409 |
OEM PCB Assembly Kit, ES-P-N2N1-2409, HW Rev 02.00 SBC, 2.4 GHz, MIMO, HW Rev 2103.0800 MiniPCIe, 900 MHz, SISO, HW Rev 2005.0300 |
| Frequency (MHz) | Data rate | TX Power per chain (dBm) | Current 24V (A) | RX Sensitivity (dBm) |
| 2412 TO 2462 | 1 Mbps | 26 | 0.300 | -99 |
| 6 Mbps | 26 | 0.300 | -96 | |
| MCS0-HT20 | 26 | 0.300 | -93 | |
| MCS0-HT40 | 26 | 0.300 | -90 | |
| 902 TO 928 | 1 Mbps | 29 | 0.180 | -93 |
| 6 Mbps | 26 | 0.120 | -91 | |
| MCS0-HT20 | 29 | 0.180 | -88 |
