Wi-Fi 6E Mini PCIe Module axE2-6000 | Vizmonet
Wi-Fi 6E Mini PCIe Radio Module axE2-6000
The Wi-Fi 6E Mini PCIe Radio Module axE2-6000 is built for OEMs and system integrators developing high-performance wireless systems in the 6 GHz band. With OpenWRT support and 2×2 MU-MIMO architecture, it delivers stable, high-speed connectivity for industrial and embedded deployments.
It is ideal for routers, industrial gateways, surveillance systems, and custom wireless platforms. Explore Mini PCIe Wi-Fi radio modules or industrial wireless applications.
Wi-Fi 6E OpenWRT Mini PCIe Module for 6 GHz Applications
The axE2-6000 operates in the 6 GHz band (6000–7125 MHz), enabling reduced interference and improved throughput compared to legacy bands. Based on the IEEE 802.11ax standard, it ensures high efficiency and reliability. Its OpenWRT compatibility allows engineers to customize firmware, optimize routing, and control network behavior for advanced deployments.
Industrial Use and Integration
This module is widely used in industrial IoT, edge networking, and mission-critical wireless systems. It supports deployments in mining, oil & gas, and public safety networks where consistent performance is required.
Key Features
- Mini PCIe form factor with PCI Express 3.0 interface
- IEEE 802.11 a/b/g/n/ac/ax compliant
- 6 GHz Wi-Fi 6E band support (6000–7125 MHz)
- 2×2 MU-MIMO architecture
- Up to 30 dBm transmit power
- OpenWRT and Linux support
- Operating temperature: -40°C to +85°C
- Rugged design with vibration resistance
axE2-6000 Wi-Fi 6 Key Features
IEEE 802.11 a/n/ac/ax
Wifi 6E Transceiver module, complying to 802.11 an/ac/ax standards supporting 4T4R in 6 GHz to 7.125 GHZ Band.
OpenWRT support
OpenWRT Linux supported by ath11K wireless driver
Interference Desensitization
Low noise Receiver design integrated with top-tier OBB management provides strong resilience to out-of-band signals, maintaining robust connectivity in the most challenging environments
Best-in Class Receive Sensitivity
Low noise receiver tweaked for optimized Noise Figure offers sharp ears to the OEM systems to maintain reliable connectivity under all circumstances
TX Power of 30 dBm
Highly linear transmitter design with an ultra-high TX power of 30 dBm adhering to strict EVM level exceeding requirements of OFDM modulated signals
Low Latency and High Data Bandwidth
The module offers low latency and high Data Bandwidth, which are crucial for seamless communication and optimal performance. With theoretical maximum speeds of up to 2.4 Gbps with 1024 QAM modulation, it delivers exceptional performance for critical applications
BlackPepper BKP-N2N2-2450
BlackPepper BKP-N2N2-2450
- SWaP-C (Size, Weight, Power & Cost) optimized Radio Module
- High-Performance, Dual independent Radio operating in ISM 2.4 GHz license-free Band and 4.9 GHz (Public safety), UNII-B1,B2A,B2C and B3 Bands
- Conforming to IEEE 802.11 a/b/g/n Standards and 2×2 MIMO
- 29 dBm TX Power
- -40 deg C to +85 deg C Operating Temperature
- Robust and Vibration Resillience
Technical Performance Overview
The axE2-6000 is optimized for consistent throughput and stable wireless links. Its RF design ensures better receive sensitivity and signal reliability, especially in long-range and outdoor deployments.
Technical Specifications
| Chipset | QUALCOMM QCN-9074-1 |
| EEPROM | 2-Mbit serial I²C bus EEPROM |
| Host Interface | Mini PCIe interface with PCIe 3.0 |
| Operating System | Linux, supports open source ath11K Linux driver |
| Security | AES-CCMP at 128/256 bits AES-GCMP at 128/256 bits WEP, TKIP hardware encryption WAPI-2 hardware encryption WPA/WPA2-Personal/WPA2-Enterprise and WPA3 Personal |
| Operating frequency (11b/g/n) | 2412 MHz to 2484 MHz (Operating channels) |
Data rate-11b Data rate-11g Data rate-11n Data rate-11ac Data rate-11ax | 1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps 6Mbps, 9Mbps, 12Mbps, 18 Mbps, 24Mbps, 36Mbps, 48Mbps, 54Mbps MCS0, MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7 MCS0, MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7 ,MCS8, MCS9, MCS10, MCS11 MCS0, MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7 ,MCS8, MCS9, MCS10, MCS11, MCS12, MCS13 |
| Channel BW | 5 MHz/10 MHz/20 MHz/40 MHz |
| Compliance | RoHS, MIL-STD-810G Shock & Vibration |
| MAC ID | 74E277 Series |
| INTERFACE SPECIFICATIONS | |
| Operating Voltage | 3.3V DC / 5V DC (through miniPCI pins 45,47,49,51 for PA) |
| Total DC Power Consumption | 11 Watts in 2×2 MIMO mode |
| RF Antenna connector | x4 MMCX Female(Jack), Straight connectors |
| ENVIRONMENTAL SPECIFICATIONS | |
| Operating Temperature Range | -40 deg C to +85 deg C |
| PHYSICAL SPECIFICATIONS | |
| Mechanical Dimension | (L) 51 mm x (W) 30 mm x (W) 21mm |
| Weight (grams) | 46 |
| REGULATORY INFORMATION | |
| Compliance | Work in Progress |
| PACKAGING INFORMATION | |
| No of units | 100, Shipping Carton Dimension (52 cm x 23 cm x 13 cm) |
| ORDERING INFORMATION | |
| axE2-6000 | Mini PCIe Radio Module, 2×2 MU-MIMO, IEEE 802.11 a/n/ac/ax, 6 GHz 30 dBm |
| Frequency (MHz) | Data rate | TX Power per chain (dBm) | DC Power Consumption (W) | RX Sensitivity (dBm) |
| 11n-HT20 | MCS0 | 27 | 7 | -92 |
| MCS7 | 21 | 5.2 | -73 | |
| 11n-HT40 | MCS0 | 27 | 7 | -89 |
| MCS7 | 21 | 5.2 | -70 | |
| 11ac-VHT20 | MCS0 | 27 | 7 | -95 |
| MCS11 | 21 | 5.2 | -66 | |
| 11ac-VHT40 | MCS0 | 27 | 7 | -92 |
| MCS11 | 20 | 5 | -63 | |
| 11ac-VHT80 | MCS0 | 27 | 7 | -89 |
| MCS11 | 20 | 5 | -60 | |
| 11ac-VHT160 | MCS0 | 27 | 7 | -86 |
| MCS11 | 19 | 5 | -57 | |
| 11ax-HE20 | MCS0 | 27 | 7 | -93 |
| MCS13 | 19 | 5 | -63 | |
| 11ax-HE40 | MCS0 | 27 | 7 | -90 |
| MCs13 | 19 | 5 | -60 | |
| 11ax-HE80 | MCSo | 27 | 7 | -87 |
| MCS13 | 18 | 5 | -57 | |
| 11ax-HE160 | MCS0 | 27 | 7 | -84 |
| MCS13 | 17 | 5 | -54 |
| Parameter | Specification |
Receiver Maximum input level (10% PER) 11a < 18 Mbps, 11n/11ac/11ax < MCS5 11a > 18 Mbps, 11n/11ac/11ax > MCS5 | > 2 dBm > -10 dBm |
| Frequency Accuracy | Within ± 10 PPM |
Receiver Adjacent Channel Rejection (ACR) 11n, 6 Mbps 11ac VHT40,11ax HE80-MCS0 11ax, HE160-MCS11 |
> 25 dBC > 30 dBC > 11 dBC |
Interference De-sensitization 11ax, HE20-MCS13 400 MHz to 2350 MHz 2400 MHz to 3600 MHz In Band Interference |
> 70 dBC > 50 dBC >30 dBc |
| Parameter | Specification |
| RF Power control Step | 0.5 dBm |
| Spectral Mask Compliance | Compliant with IEEE 802.11a/n/ac/ax Mask, with > 5 dB margin |
| EVM Compliance | Compliant with IEEE 802.11a/n/ac/ax EVM requirement with > 5 dB margin |
| Second Harmonic Spurious Emission | -60 dBC |
| Third Harmonic Spurious Emission | -70 dBC |
| Transmitter Spurious Emission | FCC PART 15E COMPLIANT |
Why Choose axE2-6000?
The axE2-6000 combines strong RF performance, industrial reliability, and flexible software support. It is designed for real-world deployments where stability and control are critical. Vizmonet supports OEMs with
RF and wireless engineering services and integration support.
Download the axE2-2000 datasheet or contact Vizmonet for product integration, customization, and OEM deployment support.
Frequently Asked Questions
Does this module support Wi-Fi 6E?
Yes, it operates in the 6 GHz band (6000–7125 MHz).
What is the transmit power?
Up to 30 dBm.
Does it support OpenWRT?
Yes, it supports OpenWRT using the ath11k wireless driver.
What applications is it suitable for?
Industrial IoT, routers, surveillance, embedded systems.
What temperature range does it support?
-40°C to +85°C.
What is the form factor?
Mini PCIe.
Our Partners
